Features:

• Cold Weld compound eliminates welding and brazing.
• Can be tapped, drilled, machined, sanded or filed. Sets in 15 minutes, full cure at 12 hours.
• Resistant to petrol, diesel, oil, hyd oil, water and anti-freeze.
• Few adhesives are as effective or as useful as Pro Seal Automotive Products
• Pro Seal Automotive Products are designed to withstand the extremes common to every car engine
• Heat, friction, vibration and compression conspire against many other adhesives, but Pro Seal holds strong and fast even under these adverse conditions
• Pro Seal Pro Weld is the world's toughest, fast-setting, liquid metal chemical formulation for the cold welding of steel, iron, brass, aluminum, copper, pewter, wood, ceramic, plastic and porcelain
• Resists most chemicals including gasoline, diesel fuel, water, motor oils, transmission fluids, hydraulic fluids and anti-freeze

Directions:

• Surface must be clean,dry and free from grease,oil and dirt
• For best results,roughen surface to be Pro Welded with sandpaper or file.Note:some sandpapers leave an oily residue.repeat step #1
• Squeeze out equal amounts from each tube onto a disposable surface such as a piece of cardboard.Mix thoroughly together until a uniform gray color is achieved.Mix only what you can use immediately
• Apply Pro Weld to surface to be repaired.The mixture will become hot while it sets.
• Working time 90-120 minutes.Develops 80% bond strength in 12 hours with full cure after 24 hours Final bond withstands temperatures up to 150C°
• If temperatures is below 5C°,development times may be lengthened
• Clean up excess material before it dries with a towel or rag dampened with paint thinner
• When compound is full cured,it can be drilled,filed,machined and tapped