Make sure it fits Select your bike

4 Stroke Tach Tacho Hour Meter Motorcycle Dirt Marine ATV Mower Engine

SKU: TL0024

Make sure it fits Select your bike

SKU: TL0024

AU AU $23.89

Brand New Inductive Tach Hour Meter for Marine ATV Motorcycle Dirt Ski Generato

Has the same features as hour meter plus tachometer feature.
Works on 4 stokes gas engine (Not for OHV engine, please use settable Tacho meter, please search "settable" in our store to get them).
No battery required-connecys to spark plug wire. Hour records and displays to 9,999.9 hours.stand-by time up to over 20,000 hours. Maximum RPMs 99999
Track the service life of your vehicle-oil changes, valve, adjustments, spark plugs, etc
Easy installation-peel & stick,no wiring necessary,or attach with enclosed hardware.
Hour glass symbol appears and flashes on/off to indicate counting time.
Automatic roll over
Resolution 0.1 hour.
100% epoxy encapsulated casing resists water,shock,stand fire of 85 celsius degree
That's all there is to the installation .now you're set to accurately track your mainteance Don't forget to record the metered time when performing maintenance.

Wrap the included pick-up wire around the spark plug wire five times.Start wrapping the pick-up wire about 4cm from the end of spark plug boot .Use the included zip tie to secure the pock -up wire wrapping as shown in the photo right.
Before continuing the installation ,insert the pick -up wire into the rear of the meter.Start the motor to make sure the meter is picking up the ignition signal .if it is,this will activate the timer on the meter and the icon on the left of the LCD will flash .You 'll have to wait at least 6 minutes for the timer to increase the timer display (1/10th of an hour). if it is not picking up the ignition signal ,slide the pick-up wrap closer to the spark plug boot.
if the meter is successfully picking up the spark signal ,run and zip tie the pick-up along one of the throttle cables. make sure the pick-up wire can npt make contact with the engine.Also,make sure you leave enough slack (about 8cm) so removing the spark plug wire is possible . Keep in mind the general location of final mounting location on the frame spare.

a.Drilling into your frame with 2.5mm socket it to the frame coming with two pick -up screws.
b.Using padded double -sided tape on the backside of the meter and secured it to the frame spar with zip ties.

compatibility:All motorcycle models(anytiong with a spark plug really should work)
hardware Included:meter ,pick-up wire,two screws
Tools Required: 2.5mm socket to remove shroud,wire cutters

Despite every effort to provide accurate images of each product's colour, actual colours may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. We will not accept responsibility for any colour differences that are not factory faults.
Parts compatibility given is a guide only. We are not liabel for misapplication. Please check compare with your old part for fitment to your bike or check with your mechanic before purchasing.
International customers: please be aware that your country's customs may charge you an import duty or tax on this item upon delivery. Please refer to your relevant authorities for more information.

Brands	XYT World
Item Returns	This item can be returned